11 tons dry powder foam combined fire truck

豪沃11吨Dry powder foam fire truck

（豪沃ZZ5357TXFV464MF5底盘）

技术规格书

Howo rear twin bridge foam dry powder combined fire truck adopts the HOWo type truck type II chassis produced by Jinan Trucks Co., LTD., China National Heavy Truck Group, chassis model:ZZ5357TXFV464MF5，最高车速101km/h。Original four-door two-row cab, with the original car air conditioning, the original car dashboard set fire control panel and alarm light control box;The back seat of the rear seat is equipped with four special backrest for air breathing apparatus and fixed fixture, which is comfortable to ride;The cab is reversible for easy engine maintenance。The top includes pump room, equipment box, water tank, foam tank and dry powder tank, etc., the liquid load of the vehicle is water5500L、泡沫3000L，干粉2000L。Water tank using high qualityQ235Carbon steel plate, foam tank304Welded stainless steel, dry powder tank material isQ345R。装备CB10/360Low pressure fire pump,PL8/48Type II dual-purpose fire cannon,PF30干粉炮。The vehicle is widely used in large and medium-sized city fire brigade, petrochemical, factory and mining enterprises, ports and docks and other places, can fight large oil fires and general material fires。

一、  底  盘

型    No. : SinotruK Jinan Truck Co., LTD/ ZZ5357TXFV464MF5

发 动 Machine: China Heavy Duty Automobile Group Co., LTD

型号：MC11.44-60

功率：327kW

Drive type: rear wheel drive

轴    距：4600+1400mm

排放标准：GB3847-2005，GB17691-2018国六

二、  驾驶室

结    Structure: flat head, original double row seat four-door occupant room。

Seating Settings: Front row2人后排4人。

The front of the seat is equipped with guardrail and armrest。The firefighters quickly carried the air breathing apparatus on the way to the fire rescue, arrived at the fire site, and quickly put into the fire rescue operation。

Cab structure: installation of hydraulic tipping mechanism suitable for tipping。

Equipment in the cab: in addition to the original car equipment, install a force extractor control switch,100WAlarm, light switch, etc。

Outside the cab: long rows of alarm lights are installed near the front of the cab roof1个。

三、 容  罐

容    量：水：5500Kg  泡沫：3000kg

材    质： Water tank: high quality steel plate, high-tech anti-corrosion treatment

Foam tank: high quality stainless steel plate

结    构： 框架焊接，The tank body is provided with longitudinal and transverse anti-swing plates to reduce the impact of water in the tank on the tank body during the running of the vehicle;The front and rear wall panels of the tank are folded with trapezoidal rib, which makes the tank have sufficient strength and stiffness。

The top of the tank is provided with a quick opening manhole to facilitate maintenance personnel to enter and exit。The tank is provided with a device and a filter screen to prevent the water pump from absorbing water and forming a vortex, thereby affecting the flow rate。

The tank is provided with a stainless steel float type liquid level indicator, which can display the capacity of fire extinguishing agent in the tank through the liquid level gauge on the instrument panel;A sewage outlet with ball valve is provided at the bottom of the tank。

罐体设有2个76mmOverflow pipe, both sides of the car2个76mmThe injection port is convenient for other vehicles to supply water and add liquid。

设    备：2A population hole with a quick locking and opening device。

2Liquid level indicator。

2One sewage outlet with stainless steel ball valve。

4Two water injection ports (two on each side)

Process: solid and reliable welding, removing and cleaning slag, welding and other defects;After welding should be done to the tank24Hourly hydrostatic test to ensure no leakage。

四、 Fire pump and piping system

消防泵：CB10/60Low pressure Fire Pump (Shanghai Rongshen)

流    量： 60L/s 

压    力： 1.0MPa                                                                                                        

安装型式： 后置

Vacuum pump: piston type;

Vacuum pump material: wear resistance, corrosion resistance to meet the sealing requirements;

引水时间≤35s，吸深≥7m。

Maximum vacuum degree: ≥85kPa；

管路系统

Suction pipe: water pump is providedΦ150mmWater inlet, can be from natural water source, liquid tank,The fire reservoir absorbs water, and the conversion reducing interface can be added to connect the fire hydrant to absorb water and supply water. The suction pipe is placed on the roof of the car。1个带Φ150mmThe water inlet of the butterfly valve is used to connect with the water tank。

出水管路：

   车顶设置1个Φ100mmThe outlet fire cannon pipeline and control valve are made of flexible joints;

Pump room on the left and right sides of each1个Φ80mm和1个Φ65mmWater outlet controlled by manual ball valve。

注水管路：泵房内设置1个Φ65mmPump into the tank water injection pipeline and control valve;

There are two sides of the car2个Φ65mmThe water injection pipe can inject water into the tank, and the interface is an internal button type interface and is provided with a closed cover。

Discharge pipe:In order to protect the water pump and the ball valve, the residual water pipe is installed in the pipeline, and respectively配有球阀。

冷却水管路：In order to make the force extractor cope with various complicated situations in the work,It is equipped with cooling water pipe and control valve communicated with the inlet and outlet water pipe。

五、 消防炮

型    号：PL8/48Fire cannon (West)

流    量：48（L/s）

射    程：水≥60m   泡沫≥55m

压    力：1.0MPa

位  Place: Located at the top of the water tank。

控  System: Manual control, with locking mechanism, easy to operate。

六、 取力器

型    Type: Full power sandwich force extractor

Cooling method: forced water cooling

Lubrication method: splash lubrication

Operation mode: In the driver's room, the force extractor is operated on the instrument panel. The force extractor is convenient and stable with no noise。

安  Installation: The force extractor is well matched with the engine, accurate installation, no self-falling phenomenon after combination。

七、 Equipment case and pump room

主要材质：

Skeleton, skin are high quality carbon steel;The internal equipment frame is made of aluminum alloy profiles, and the interior plate is oxidized aluminum plate。

基本结构：

1For the overall structure, the front is an equipment box, the middle is a water tank, and the rear is a pump room。

2The rear is the pump room,Equipped with instrument panel and operating system, equipment case and pump room are equipped with locking shutter doors。The frame is welded to the structure and ensures its strength and stiffness。

3The space can be adjusted arbitrarily, and the equipment box is provided with a drainage hole。

4The equipment box is reliable, beautiful, can be adjusted arbitrarily, and is equipped with a large space curtain door equipment box to ensure the full use of space。

5The carriage and pump room are equipped with lighting to meet the lighting needs of night fire fighting。

Aluminum alloy rolling shutter door:

1All the equipment compartment and pump room are using a locked shutter door, the handle and lock pin are durable, no deformation, and the sealing performance has been tested by water,Ensure that there is no leakage。

2Rivets are fixed in the slide rails on both sides of the rolling shutter door to avoid falling off。

3There are lights in each equipment compartment, which are controlled by the opening and closing of the rolling shutter door。

4One aluminum alloy curtain door on the left and right of the rear, and one at the rear, which is safe, reliable, beautiful and practical。

基本原则：

(1) Integration of design equipment according to combat organization and combat deployment;

(2) Design various equipment brackets according to ergonomic principles;

(3) Without any climbing tools, take any equipment in the box simple and practical principle。

(4) Place the equipment according to the logical relationship and frequency of use;

(5) Stand on the ground or pedal1-2Use any equipment in the action。

Eight, dry powder system

Dry powder tank: Load of dry powder:2000Kg

           Working pressure: Minimum0.5MPa  最高1.4MPa

           设计压力：1.6MPa

  Nitrogen cylinders: Quantity:9个   单瓶容量：60L     Maximum working pressure:15MPa

Dry powder cannon: Model:PF30      Rated injection pressure:1.4MPa

流量：30kg/s      射程：≥35m

        Pressure reducing valve: Quantity:1个      工作压力≤1.4MPa

        Safety valve: Quantity:1个      开启压力1.6MPa

        Dry powder roll (with dry powder gun):数量：1Set;Injection rate: ≥2.5kg/s

                              射程：≥10m;Coil hose length:40m

九、电器系统

1The top of the cab is equipped with red long rows of luxury alarm lights。

2, alarm power is100W；

3In order to ensure the safety of use, the whole vehicle line is made of integrated wiring harness, and the connection is made of waterproof plug to ensure the safety of the line during use。

4The roof of the car is equipped with fire lights1Only;Safety sign lights are provided below both sides of the vehicle, and reflective signs are affixed to the body and tail according to the standard。

5All equipment boxes are installedLEDLight, convenient for night combat lighting。

6There are four flash lights and two side lights on each side of the vehicle, safety sign lights and side recovery reflectors (combined type) installed below, front and rear profile lights, one turn signal on each side, and lights in the crew room, equipment box and pump room。

7The alarm, alarm light, strobe light and circuit are independent additional circuits, and the control devices are installed in the cab。

8All lines are protected by bushing, and different colors are used to distinguish line connection forms and functions。

9Equipment on the instrument panel in the pump room: liquid level meter, tachometer, pressure gauge, vacuum meter, equipment box lighting switch, etc。

10. Instrument panel and equipment on board

1The instrument panel is located in the pump room at the rear of the vehicle with a control panel and adequate lighting;

2All control handles, switches and indicators are marked in Chinese near them;

3There are instructions for the procedure。

4All signs are durable and highly adhesive, and can withstand the effects caused by drastic changes in temperature and climate。

5The operation panel is made of high-quality aluminum plate, beautiful, durable, and the overall weight is light。

6Pump room operating system is set at the rear of the vehicle, no pressure outlet, to ensure the safety of the operator, with panel lighting。

Xi. General technical requirements

1The vehicle performance is consistentGB7956Fire engine Performance Requirements and test methods。

2The appearance of the vehicle should maintain a certain flatness and comply with relevant regulations。

3All rivets maintain a certain density, in line with the provisions of enterprise standards。

4All welding firm, smooth, smooth, in line with enterprise standards。

5All operating switches, instruments, equipment racks and vehicles are marked with nameplates that meet the specifications。

12. Documents accompanying the car

1Chassis operating instructions                         2Chassis quality warranty card

3Chassis maintenance manual                           4Chassis certificate

5List of tools on board                           6Fire engine operating instructions

7Fire engine fire equipment list                    8Fire truck certificate



器材配备表

(1) The maintenance of the car chassis and supporting pumps shall be carried out according to the corresponding operating instructions。

(2) The vehicle should be run in according to the requirements of the vehicle instruction manual before use。

(3) Lubrication system maintenance: the vehicle needs to be cleaned and maintained once every 5000km-10000km, and it also needs to be cleaned and maintained once when the engine noise is too large, the acceleration is weak or the water temperature is too high。Cleaning the oil sludge and other deposits inside the engine can avoid the oxidation thickening of the oil at high temperature, which can effectively reduce the wear of the engine components, thereby extending the engine life and improving the engine power。

(4) Cooling system maintenance: the vehicle should be cleaned and maintained once in the winter and summer seasons, I hope you clean and maintain once every 6 months to 8 months in normal driving, or clean and maintain once when the water temperature is too high, water leakage, and the pot。Remove traces and scale that cause the engine to overheat, prevent harmful corrosion, avoid and stop leakage of seals and water tanks, and completely replace the old coolant。

(5) Fuel system maintenance: the vehicle needs to be cleaned and maintained once every 800km-1000km, or when you find the engine shivering, hysteresis and poor acceleration, black smoke, weakness, and fuel consumption。To remove the gum and carbon deposits inside the system, prevent harmful corrosion, avoid and stop leakage of seals and water tanks, and completely replace the old coolant。

(6) Transmission maintenance: cleaning and maintenance once every 800km-1000km, or cleaning and maintenance once in case of transmission slip, high water temperature, slow shift, and system leakage。Remove harmful sludge and paint film deposits, restore the elasticity of the gasket and O-ring, make the gearbox shift smoothly, improve power output, and completely replace the old automatic transmission oil。

(7) Power steering system maintenance: the vehicle needs to be maintained once every 1000km-2000km cleaning, or in case of steering difficulty system leakage, after replacing the power steering parts, it must also be cleaned and maintained once。Remove harmful sludge and paint film in the system, remove steering difficulties at low temperatures, stop and prevent leakage of power steering fluid, remove steering noise, and completely replace the old brake steering fluid。

(8) Brake system maintenance: the vehicle is cleaned and maintained once every 800km, or when the ABS reaction is too early or too slow。Remove the harmful mud paint film in the system, remove the danger of working failure at ultra-high temperature or ultra-low temperature, effectively prevent the brake fluid deterioration and expiration, and completely replace the old brake fluid。

(1) Free maintenance plan and period？ 1、跟踪服务时间：终身； 2、在交客户使用之日起，Within the normal range of use，Free repair within 10000 km or within one year (excluding wearing parts and electrical parts)，超过一年，只收取零件费； 3、服务到达时间：省内，Arrive within 24 hours;Other regions，二十四小时内派出人员； 4、每年防汛期间按排工程技术人员定期或不定期走访做到有故障及时排除，No fault active prevention。

(2) Free post-accessory supply price method？ 1、方式：在所在地技术服务站统一供货,根据用户要求由厂方直接发货； 2、配件只收工本费,不加其他费用。

(3) after-sales service？ The maintenance of the chassis can be done at a service station near the user's location。Distribution location, technical strength, contact information, please see the chassis Maintenance Manual。 Special equipment part of the maintenance, you can use telephone, fax contact information, the supplier after receiving the user's call 24-28 hours to send professional maintenance personnel to the use of the solution。

(4) Technical training programmes？ The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user, mainly from the driver how to operate the hydraulic system and special devices to be familiar with the basic principle of this kind of car and the ability to deal with general faults。

(5) We are from other places, can you send a car？ The car purchase process stipulates that customers can order online and sign a car purchase contract。预付定金。Send the car to the customer's designated place within the specified time, and the customer will pay the full amount if the car passes the inspection。

(6) The time to the factory to pick up the car？ Pick-up time: Monday to Sunday, 08:00-19:00 (Some pick-up points work time is 9:00-18:00, in case of national holidays, press release holiday time shall prevail, please pay attention to it)

Do we have a point of sale here？What if you want to see a car？ Special vehicles are different from cars and other sales companies set up 4S stores across the country, which is determined by the particularity of special vehicles。Using the now developed business network, customers as long as the call letter to place an order, according to the purchase process of the car, will be in the contract within the time range of the vehicle and vehicle complete procedures handed over to the customer。We will be based on the actual needs of users, for each user to create high-quality, personalized special vehicles, you are welcome to visit the production strength and product process, we will provide you with the best service!